Emotion CR Ultimate *NEW 2011* WFT Technology The WORK Emotion CR Ultimate ("Kiwami") is the latest addition to the WORK Emotion lineup. Inspired by the classic Emotion CR design, it utilizes the latest in WORK Flowforming Technology (WFT) for a lighter and stronger wheel. The wheel comes in a myriad of finishes, including Matte Bronze (AHG), Matte Black (MBL), White (WHT), GT Silver (GTS), and WORK Metal Buff (WMB). Sizing ranges from 15" up through 18", and includes a much desired 18x10.5 size. This WORK Emotion CR Ultimate utlizes WORK Flowforming Technology, also known as spun forming here in the U.S. The key benefit for flow forming is able to reduce the barrel thickness, thus reducing the weight of the wheel without compromising the strength of the rim barrel. The CR Ultimate is a good choice for motorsports racing use and/or general street use. Unlike our competitors' flow forming wheels, WORK flow forming wheels start with low-pressure cast construction, whereas some of our competitors use lower quality gravity casting. Low-pressure cast construction has a denser material property over gravity cast wheels, thus allowing a greater strength advantage over gravity cast with flow-forming barrel. Application available for both front wheel, rear wheel and all wheel drive vehicles. Depending on size and offset, the Emotion CR Ultimate is available with flat face, semi-concave, or deep concave face. Some specs are BBK friendly.
Emotion 11R-FT *NEW 2011* USA Exclusive Edition Brand new for 2011, we are proud to announce a special edition WORK Emotion 11R-FT that is exclusive to WORK Wheels USA. Featuring Matte Gray Silver (MGS) Finish & Matte Gunmetal (MGM) Finish, there is also upgraded sizing, including a long awaited 18x10.5 sizing! Available only through WORK Wheels USA & our WORK Wheels Authorized Dealers! This WORK Emotion 11R-FT utlizes WORK Flowforming Technology, also known as spun forming here in the U.S. The key benefit for flow forming is able to reduce the barrel thickness, thus reducing the weight of the wheel without compromising the strength of the rim barrel. The 11R-FT is a good choice for motorsports racing use and/or general street use. Unlike our competitors' flow forming wheels, WORK flow forming wheels start with low-pressure cast construction, whereas some of our competitors use lower quality gravity casting. Low-pressure cast construction has a denser material property over gravity cast wheels, thus allowing a greater strength advantage over gravity cast with flow-forming barrel. Application available for both front wheel, rear wheel and all wheel drive vehicles. Depending on size and offset, the Emotion 11R-FT is available with semi-concave or deep concave face. Some specs are BBK friendly.
Emotion XD-9 Emotion XD9 is one of our most popular Emotion series wheels. XD9 is made of one piece low pressure cast aluminum. Aggressive 9 spokes styling with huge rim flange (Lip). Popular with most rear wheel drive cars, but application is also available for front wheel drive and all wheel drive vehicles. Rim Flange Size (Lip) - 17 X 7.0 (37mm) 7.5 (39mm) 8.5 (46mm) 9.5 (68mm) 18 X 7.5 (37mm) 8.0 (37mm) 9.0 (45mm) 10.0 (73mm)
Emotion XT-7 Emotion XT7 is a one piece low pressure cast aluminum wheel. The bold 7 spokes design charactorize strength and durability. Wide range of sizes and offset. Application available for both front wheel, rear wheel and all wheel drive vehicles. Depending on size and offset, XT7 is available with flat face, semi-concave or deep concave face. Some specs are BBK friendly.
Emotion CR-KAI Emotion CR-Kai, one of our most celebrated wheel in the Emotion line up. Emotion CR-Kai is a one piece low pressure cast aluminum wheel. The unique and aggressive split 5 spokes design that has been highly regarded, even accepted and copied by many of our competitors. Emotion CR-Kai has been proven both on the track and street. Wide range of sizes and offset available. Application is available for most front wheel, rear wheel and all wheel drive vehicles.
EQUIP E05 New 2009 Model WORK is proud to resurrect the ledgendary EQUIP series back into the 2009 wheel line up with it's redesigned EQUIP E05. The all new EQUIP E05 harness the same world renown WORK manufacturing quality and performance. The new EQUIP E05 is a three-piece construction design. 20" model is made of high quality FORGED aluminum alloy and the 22" is made of high strength FORGED BILLET aluminum alloy to retain the reputation of EQUIP Series quality. Application: Japanese, European, Domestic and Exotic vehicles. Each Wheel Include: Center Cap and Valve Stem
EQUIP E10 New 2009 Model WORK is proud to resurrect the ledgendary EQUIP series back into the 2009 wheel line up with it's redesigned EQUIP E10. The all new EQUIP E10 harness the same world renown WORK manufacturing quality and performance. The new EQUIP E10 is a three-piece construction design. 20" model is made of high quality FORGED aluminum alloy and the 22" is made of high strength FORGED BILLET aluminum alloy to retain the reputation of EQUIP Series quality. Application: Japanese, European, Domestic and Exotic vehicles. Each Wheel Include: Center Cap and Valve Stem
Gnosis HS201 *NEW 2011* Brand new for 2011, the Gnosis HS201 is a fresh addition to the Gnosis lineup with its 12 spoke design. The Gnosis design concept focus on incorporating classic styling with bold and aggressive features, such as sharper spoke edges and all new redesigned lip flange. This gives the Gnosis HS201 the look of strength without compromise the classic and rich styling. All Gnosis Wheels are two-piece construction. Utilizing the latest WORK Low-Pressure Casting and Rim Forming technology to assure the strength and quality of every Gnosis Wheels. Application: Japanese, European and Domestic Vehicles. Each Wheel Include: Center Cap and Valve Stem
Gnosis HS202 *NEW 2011* Brand new for 2011, the Gnosis HS202 is a fresh addition to the Gnosis lineup with its unique curved mesh design. The Gnosis design concept focus on incorporating classic styling with bold and aggressive features, such as sharper spoke edges and all new redesigned lip flange. This gives the Gnosis HS202 the look of strength without compromise the classic and rich styling. All Gnosis Wheels are two-piece construction. Utilizing the latest WORK Low-Pressure Casting and Rim Forming technology to assure the strength and quality of every Gnosis Wheels. Application: Japanese, European and Domestic Vehicles. Each Wheel Include: Center Cap and Valve Stem
Gnosis GS-2 5 Spoke Elegance Introducing the all new Gnosis GS-2. The new Gnosis Series is one of new models for WORK 2009 line up. The Gnosis design concept focus on incorporating classic styling with bold and aggressive features, such as sharper spoke edges and all new redesigned lip flange. This gives the Gnosis GS-2 the look of strength without compromise the classic and rich styling. All Gnosis Wheels are two-piece construction. Utilizing the latest WORK Low-Pressure Casting and Rim Forming technology to assure the strength and quality of every Gnosis Wheels. Application: Japanese, European and Domestic Vehicles. Each Wheel Include: Center Cap and Valve Stem Custom 5 Lugs Bolt Pattern Available. (Please check with your authorized dealer) TPMS (Tire Pressure Monitoring System) Compatible.
Gnosis GS-3 7 Spoke Elegance Introducing the all new Gnosis GS-3. The new Gnosis Series is one of new models for WORK 2009 line up. The Gnosis design concept focus on incorporating classic styling with bold and aggressive features, such as sharper spoke edges and all new redesigned lip flange. This gives the Gnosis GS-3 the look of strength without compromise the classic and rich styling. All Gnosis Wheels are two-piece construction. Utilizing the latest WORK Low-Pressure Casting and Rim Forming technology to assure the strength and quality of every Gnosis Wheels. Application: Japanese, European and Domestic Vehicles. Each Wheel Include: Center Cap and Valve Stem
Gnosis GS-5 Twin 7 Spoke Elegance Introducing the all new Gnosis GS-5. The split 7 spoke GS-5 is one of latest models for the WORK 2009 line up. The Gnosis design concept focus on incorporating classic styling with bold and aggressive features, such as sharper spoke edges and all new redesigned lip flange. This gives the Gnosis GS-5 the look of strength without compromise the classic and rich styling. All Gnosis Wheels are two-piece construction, utilizing the latest WORK Low-Pressure Casting and Rim Forming technology to assure the strength and quality of every Gnosis Wheels. Application: Japanese, European and Domestic Vehicles. Each Wheel Include: Center Cap and Valve Stem Custom 5 Lugs Bolt Pattern Available.
VS-TS Trident Spoke *NEW* The VS-TS is a new release from WORK in their VS Concept series. The trident five spoke design comes in various finishes, while barrels also can be customized for the ultimate combination. The VS-TS is a 3 piece wheel that utilizes the latest low pressure casting processes and barrel forming technologies. This wheel comes in 19" / 20" sizing, with Full Reverse Lip. Widths range from 7.5" all the way up to 13.5", depending on the barrel choice. Applications Available For: Lexus-Toyota / Infinity-Nissan / Acura-Honda / Audi / BMW / Porsche / Mercedes / Volvo / Ferrari / Corvette / Ford Each Wheel Includes: Center Cap & Valve Stem TPMS Compatibility: Upon Request
VS-MS Mesh Spoke *NEW* The VS-MS is a new release from WORK in their VS Concept series. The ten spoke mesh design comes in various finishes, while barrels also can be customized for the ultimate combination. The VS-MS is a 3 piece wheel that utilizes the latest low pressure casting processes and barrel forming technologies. This wheel comes in 19" / 20" sizing, with Full Reverse Lip. Widths range from 7.5" all the way up to 13.5", depending on the barrel choice. Applications Available For: Lexus-Toyota / Infinity-Nissan / Acura-Honda / Audi / BMW / Porsche / Mercedes / Volvo / Ferrari / Corvette / Ford Each Wheel Includes: Center Cap & Valve Stem TPMS Compatibility: Upon Request Custom 5 Lug Bolt Pattern Available.
VS-RS Star Split Spoke *NEW* The VS-RS is a new release from WORK in their VS Concept series. The split five spoke design comes in various finishes, while barrels also can be customized for the ultimate combination. The VS-RS is a 3 piece wheel that utilizes the latest low pressure casting processes and barrel forming technologies. This wheel comes in 19" / 20" sizing, with Full Reverse Lip. Widths range from 7.5" all the way up to 13.5", depending on the barrel choice. Applications Available For: Lexus-Toyota / Infinity-Nissan / Acura-Honda / Audi / BMW / Porsche / Mercedes / Volvo / Ferrari / Corvette / Ford Each Wheel Includes: Center Cap & Valve Stem
VS-XX VS Sports High WORK VS-XX. The classic mesh design that is leading the pack. WORK VS-XX is a true 3 piece modular wheel. Utilizes the latest low-pressure cast center disk and barrel forming technique to assure the strength and quality. VS-XX has diverse range of diameters, size and application. The attractive styling and quality has made the VS-XX a top choice for many higher end coupes and sedans. Application: Japanese, European and Domestic vehicles. Each Wheel Include: Center Cap and Valve Stem.